3layers Pliable Conduit with Anti-electromagnetic Technology Φ25 Yellow Superflex Plus 2017025

3layers Pliable Conduit with Anti-Electromagnetic Technology Φ25 Yellow-Red Superflex Plus 2010025

SUPERFLEX PLUS new 3-layer conduit with anti – electromagnetic technology drives to a new era in concealed type installations in plasterboard. The corrugated external wall of the conduit provides the necessary flexibility and the required mechanical strength with the use of less raw materials. The internal layer follows the geometry of the outer layer, facilitating the smooth insertion of the cables. The third independent layer of longitudinal lines, in indelible color, creates a long lasting color marking between electrical installations and communication systems.

The inner layer of SUPERFLEX PLUS plastic conduit incorporates a new innovative anti – electromagnetic technology which absorbs a part of the electromagnetic radiation emitted by the cables. Moreover, a special ultra-slip material is added in the internal layer which ensures the smooth insertion of the cables.

The conduit is produced by specially stabilized thermoplastic PP, halogen free (EN 50642), free of heavy metals (RoHS) and low smoke (EN 61034-2). Therefore, it is the most reliable and safe solution in case of fire, which also meets the requirements of Fire Protection Regulation 364/2016/ΕΕ.

SUPERFLEX PLUS was awarded at the Packaging Awards 2021 for the new way of packaging which can save up to 50% more storage and transport space. In addition, this results in a better environmental footprint due to the reduced volume of waste it leaves after use.

APPLICATION FIELD

Ideal for concealed type installations in plasterboard, cavity walls and sub-ceiling, in indoor spaces such as office buildings, hotel rooms and residences.

APPLICATION STAND: EN 61386.22, ΕΝ 50642, ΕΝ 60754-2, ΕΝ 61034-2

INSTRUCTIONS FOR COMPLIANCE: 2014/35/EE (LVD), 2011/65/EE (RoHS)

COLOR: RAL 1023 yellow (outer layer), RAL 9004 black (inner layer) RAL 3020 red (longitudinal lines)

NOMINAL DIAMETER: Outer (DN/OD)

TIGHTNESS DEGREES: min IP 65

PROPERTIES

1) The inner layer incorporates an innovative Anti - Electromagnetic Technology

2) 40% lower friction due to special slip material added in the internal layer (test conducted according to IEC/TR 62470)

3) Longitudinal stripes of indelible color indicate the power of the protected cables

4) No toxic or corrosive gases in case of fire

5) High mechanical resistance in high temperature of (105oC)

6) Not attractive to rodents (European Patent EP2698792)

7) Ideal for concealed type installations in plasterboard, cavity walls and sub-ceiling

8) New specially designed packaging that saves 25% - 50% more storage space

9) Lower costs due to its reduced storage space and lower installation time

10) Ease of use due to its ability to regain its initial shape after bending.

11) Incorporates antistatic technology which protects against static electricity (Patent Protected: 1009810)

12) Better visibility of escape ways

CHARACTERISTICS

Resistance to compression: 320Nt/5cm

Resistance to impact: 2J (at-15oC)

Lower temperature range: -15oC

Upper temperature range: +105oC

Resistance to bending: Pliable

Electrical characteristics: With electrical insulated characteristics

Protection against ingress of solid objects: min IP65

Protection against ingress of water: min IP65

Resistance against corrosion: Not applicable

Tensile strength: None declared

Resistance to flame propagating: Non flame propagating

Suspended load capacity: None declared

Dimmable	Όχι/No
Lamp Socket
Volt
Watt
Brightness
Color Temperature
Endurance