Instabus Switch Titanium 5WG1286-2AB81

Universal Dimmer Ν527 5WG1527-1AB02
Characteristics:

Application programs:
• Dual universal speed controller
for On / Off, dimming, price setting
• Ability to activate bus voltage recovery
• You can adjust the brightness adjustment range
• The initial value can be configured
• Status query or automatic status transmission is
possible in case of change
• Ability to adjust brightness and value from OFF mode
without lighting
• Possibility of attenuation or transition to the attenuation value when
price adjustment
• ON / OFF delay is possible
• Two lighting units are possible
Power connection:
• Rated voltage: AC 230 - 240V, 50/60 Hz
• Rated current: 2.1 A.
• Uncharged power consumption: approx. 1.4 VA
• Leakage loss without load: approx. 0.7W
• Leakage loss in incandescent lamp load 500W: approx.
4.5W
Output loading:
• Number: 1 output
• Rated voltage: 230 V ñ 240 V AC, 50/60 Hz
• Rated current: 2.1 A.
• Connected load at ambient temperature 35∞C:
- Incandescent bulbs: 500 W
- High voltage halogen lamps: 500 W
- Low voltage halogen lamps with electronics
transformers: 500 W
- Low voltage halogen lamps with conventional ones
transformers: 500 VA
• Minimum connected load: 20 W
Functional elements
1 learning button:
To switch between normal mode / steering mode
Appearance details:
1 red LED:
To control the channel voltage and for the appearance of normal
mode / steering mode
Links:
• Loading circuit, mechanical:
Insulation strip length 9 ... 10 mm
The following pipe cross-sections are permitted:
-0.5 ... 2.5 mm≤ single-stranded or thin-stranded,
Ultrasonic welded 8 mm
- 0,5 ... 2,5 mm≤ thin strand with plug
connection,
airtight crimp connection
- 0,5 ... 1,5 mm≤ thin strand with plug
sleeve
Mechanical data:
• Casing: plastic
• Dimensions: DIN device mounted on a rail with N system
dimensions, width 4 units (1 unit = 18 mm)
• Weight: approx. 180 gr
• Fire load: approx. 2600
• Installation: Mounting with clips on the DIN rail
TH35-7.5 according to DIN 60715:
Electrical safety:
Degree of pollution (according to IEC 664-1): 2
• Protection type (according to EN 60529): IP 20
• Hypertension class (according to IEC 664-1): III
• Bus: SELV DC 24 V ultra low voltage fuse
• The device complies with
EN 50090-2-2 and EN 60669-2-1
EMV requirements: Complies with EN 50090-2-2, EN 60669-2-1
Environmental conditions:
• Possibility of climate resistance: EN 50090-2-2
• Ambient operating temperature: - 5 ... + 45 ° C
• Storage temperature: - 25 ... + 70 ° C
• Relative humidity (without condensation): 5% to 93%
CE mark: According to the EMC directive and the low voltage directive
  Marking: KNX / EIB