Circuit Breaker 80A 3P3D 25kA LV430633

Wall Mounted Vehicle Charging Station with Vehicle Charging Key T2S 16A 11kW 3-Phases EVH2S11P04K

Characteristics

Charging test

• Just connect the vehicle to the charging station: charging can start automatically.
• Charging can be stopped and then restarted using the Stop / Start button.
• Depending on the selected function, the charging start can be postponed to off-peak hours or the maximum charging current can be limited (16 A to 10 A, 32 A to 16 A), by any power management device provided that this device is able to close a contact that is connected to the Wallbox.
• Wallbox Plus can be connected to the TIC (Télé-Information Client) output of French cash in a single-phase home supply.
• The vehicle can be charged at maximum power according to the power available in the house at any time, without exceeding the subscription power which may lead to disconnection from the mains.

Protection against residual currents

• Wallbox Plus has a DC detector (RDC-DD). Residual current protection can be RCD type A instead of type B in single-phase and three-phase. Refer to the national standard in the few countries where the provisions of the current IEC / HD 60364-7-722 installation standard do not apply.
• The Wallbox Standard requires type B RCDs in single-phase and three-phase networks. Refer to the national standard in the few countries where RCD type A is allowed in a single-phase network.It is recommended that you use the Schneider Electric "Acti9 iID B type for EV" or, if not available in the country, the "Acti9 iID B-SI type".

Power supply network specifications

• 220-240 V single phase - 50/60 Hz - for charging at 3.7 and 7.4 kW.
• 380-415 V three-phase - 50/60 Hz - for charging at 11 and 22 kW. Grounding system: TT, TN-S, TN-C-S or IT.

Mechanical and environmental specifications

• Input protection code: IP54.
• Impact protection code: IK10.
• Operating temperature: -30 ° C to + 50 ° C.
• Storage temperature: -40 ° C to + 80 ° C.
• Optional connected cable length: 4 m.
• Security entrance check With lock.
• Warranty 24 months for the entire EVlink range.

Benefits

Wide choice

• 14 versions of Wallbox Standard and an additional 14 versions of Wallbox Plus
• Maximum charging power: 3.7, 7.4, 11 or 22 kW.
• T2 socket with or without shutter or connected cable with T1 or T2 socket.
• High resistance in T2 socket with silver contacts to avoid overheating.

quick installation

• Installation in less than 30 minutes by one person.
• Power cord from above, below or behind the device.
• Save space on the electrical panel
• Wallbox Plus allows the use of type A leakage relays instead of type B, which means space saving in the electrical switchboard.

Robustness

• High protection against mechanical shocks: IK10.
• Suitable for outdoor use: IP54.

Easy use

• "Connection & charging".
• One-touch stop / restart.
• Ability to wrap the connected cable around the charging station for storage when no longer in use.
• Technical manual: installation instructions and quick start guide available in different languages.

Energy management option

• Depending on the selected function, charging is started only during off-peak hours or a temporary current limit (from 16 A to 10 A or from 32 A to 16 A) is applied to reduce the total consumption of the building.
• The option can be activated via an external contact wired to the charging station.
• With Wallbox Plus connected to the TIC (Télé-Information Client) output of single-phase French meters, the charging time is automatically minimized according to the available power.

Applications

EVlink Wallbox charging stations can be used at home (individual residence or residential complexes), as well as in private and semi-public parking spaces (public parking spaces, corporate parking spaces, hotel ..)

Dimmable	Όχι/No
Lamp Socket
Volt
Watt
Brightness
Color Temperature
Endurance